I kept one of the 3-passenger seats that came with my passenger van so that I could carry extra passengers in the second row. Unfortunately, I had to remove the galley cabinet whenever I wanted to install the seat. I knew my ideal setup would be to have a two-passenger seat that I could install…
Mounting Electrical Fixtures I needed some mounting locations for bus-bars, fuses, and the battery-monitor shunt, so I cut a couple of pieces of scrap plywood to fit the inside front of the seat base as well as the door-side just below the opening. These were screwed in place from the outside of the base. Here…
I bought a couple 100 foot rolls of color coded stranded copper wire in 14ga and 12ga along with shorter lengths of 8ga and 4ga wire for the main battery connections. At this time, I had most of the interior of the van taken apart including the headliner, side panels, seats, and front flooring, so…